🎿 How To Change Bios Administrator Password

When IT administrators need to change the BIOS password on Windows 10 desktops, they need to take a few steps to unlock the BIOS or UEFI interface. Find out how to complete this process to change, set or reset a BIOS password on Windows 10. Step 1: Restart your HP laptop and wait for the login screen to appear. Step 2: Press the “Shift” key 5 times to activate the Super Administrator Account. Step 3: Now, access Windows via the SAC and go to “Control Panel”. Reconnect the power cable and turn on your laptop. The BIOS password should be cleared. After the Windows logon screen appears, turn off your laptop again. Disconnect the power cable. Press and hold the power button for 10 seconds to release static electricity from the system. Replace the jumper to its original position. Some notebooks can be reset by removing AC, Main battery, then cmos battery for several minutes, others have the password stored on a separate chip that cannot be reset by this procedure, in that case you will need to try some known softwares or known master passwords as suggested below, or pay a service to get it done. – It will reset you BIOS or UEFI password if you have forgotten it. - Boot into windows and change the date to 2002/01/02, - Reboot while while hitting F2 to get into the BIOS / UEFI, when the enter password window appears hit "Alt + r", a "Enter rescue password" window will appear, with 2002/01/02 date showing (if not the code won't work), enter 2. Generally to reset the BIOS password (and much of the other system settings) all you need to do is to remove the RTC battery for a few minutes. It looks like a watch battery and should be clearly visible after you slide off the bottom cover. The service manual has detailed instructions, if necessary. Share. .

how to change bios administrator password